Double indexing module type aerosol filling lines are able to reach up to 90 cans per minute (CPM) with doubled heads
DOUBLE INDEX AEROSOL FILLING MACHINE
  • Vacuum or Magnetic special table for 100-400 ml cans
  • Vacuum Separator, carton separation system
  • Digital electronic control panel
  • Euro Pallet elevator receptacle according to cans
  • Synchronous working system with feeding table
  • Air consumption 100lt/min pneumatic system
  • Cabinet and protective covers
  • Operation air pressure 8 bar
  • Magnet Flex System AISI 304 Stainless steel
  • Working System : Speed Controller
  • Conveyor : 82mm Acetal conveyor belt
  • Conveyor Height : Standard 950 mm (±50mm)
  • Electrical Requirements : 3 Phases, 440V, 60Hz
  • Energy Consumption : 0.75 Kw
  • Dimensions (W*L*H) : 1500*2500*950 mm
  • Machine Weight : ~350 kg
  • Conveyor Motor : Ex‐proof

4 Heads Products Filling:

  • Chase protection covers and pistons are stainless steel AISI 304 QUALITY
  • 4 Heads liquid filling
  • 35-65 diameter cans
  • Double head filling 100 – 400ml for cans
  • Filling range 50 – 300 ml for each head
  • Pneumatic switch system at entry and exit gates
  • No filling if no cans
  • Cabinet and protective covers
  • Easy maintenance pneumatic system
  • Production capacity 80 cpm
  • Air consumption 800 lt \min Pneumatic system
  • Operating Air Pressure 8-10 bar

2 Heads Valves Inserter & Feeder and 2 Heads Crimper:

  • 2 heads Inserter
  • Suitable for all type of aerosol cans
  • Valve Sorter 0,25 kw Ex-proof motor
  • 2 heads automatic crimper
  • Easy maintenance pneumatic system
  • Our crimping machines are known for their qualitative features like quick setting crimp-diameter, crimp-depth and auto-adjustment.
  • Production capacity is 80 cpm
  • Air Consumption 1600lt/min
  • Operating Air Pressure 8-10 bar
  • 35-65 diameter cans
  • Filling range 15 – 350 ml per head
  • Pneumatic switch system at entry and exit gates
  • Air consumption 800-1000 lt\min Pneumatic system
  • Operating Air Pressure 8-10 bar
  • Double head filling 100 -750ml for cans
  • Cabinet and protective covers
  • Table mounted, Twin controlled, partial filling arrangement, fast filling and safe working machine even for LPG.
4 Heads Propellant Filling Machine 1 240x350
  • Only device is provided from OCS .Other equipments belong SORA MACHINE
  • Specifications System : Non-Stop Precision Weigh Scale
  • Construction : Steel Construction, Covers AISI 304 Quality
  • Weighing range : 1500 g
  • Measuring Range : ± 0,04g
  • Measuring Accuracy : ± %0,01
  • Electrical Requirements : 0,8 kVA @ 3 Phases, 230V AC/115V AC, 50Hz/60Hz
  • Air Requirements : 3 lt/min @ 6-8bar
  • Dimensions : W 550 * L 700 * H 1600 mm
  • Key Features
  • Rejection system for products out of range
  • Precise and fast measuring suitable for high speed systems
  • Control every easy to use single display
Checkweigher 1 248x350
  • Single actuator inserter and sorter
  • Single hammer
  • 35-65 diameter cans
  • Operating Air Pressure 8-10 bar
  • 0,37kw unit motor
  • 0,18kw separator motor
  • 2 heads capper and cap sorter
  • 80 cans per minute
  • 2 heads hammer
  • 35-65 diameter cans
  • Operating Air Pressure 8-10 bar
  • 0,37kw unit motor
  • 0,18kw feeder motor
  • Construction and equipment are stainless steel AISI 304 QUALITY
  • All Ex-proof motor
  • Cabinet and protective covers
  • Production capacity 80cpm
  • Electronic sensor system at entry and exit gates
  • 35-65 diameter cans
  • 0,37kw unit motor
Ink Jet 1 1024x487 1 219x250
  • It adopts double blowing motor to keep air wind dissipated evenly in tunnel. So that can achieve the better effect after shrinking
  • Temperature of blade is 0-200 C
  • Speed of packing 25-30 pcs/min
  • Power 24kw
  • Power supply 3PH 220V/380V 50/60 Hz

 

Tunnel Band and heating system;

  • Wicker wire band
  • Motor & Reductive System (wat + varvel )
  • Tunnel band with speed control unit (Schneider)
  • Isolation cast stone wool
  • Furnace paint is used
  • Tunnel working by thermostat heat control can shrink between temperature of 160 and 250
  • Facility in order to reach a qualified shrink pack by heat flowing canal system working with single fan homogeneously
  • Replacing heating resistances might be carried out easily on the top of tunnel
  • It has canal system that provides a homogeneous heat flow to every single part of packs

 

Tunnel Electricity;

  • Electricity pure material : schneider, Moeller
  • Maximum heating power : 40 kw
  • Power in average : 18 kw
  • Electricity feeding : 380V 50-60 Hz

 

Tunnel Outlet Cooling;

  • A high qualified shrink pack will be obtained owing to a shocking system and Axial cooling fan at tunnel outlet
  • Paint : Furnace paint
  • The conveyor length at the end of tunnel is 2 meters as standard
Automatic Shrink Wrapper 517x250