Indexing module type aerosol filling lines are able to reach up to 60 cans per minute (CPM) with constant head numbers of the units.
NEW INDEX AEROSOL FILLING LINE
  • Magnet Flex System AISI 304 Stainless steel
  • Working System : Speed Controller
  • Conveyor : 82mm Acetal conveyor belt
  • Conveyor Height : Standard 950 mm (±50mm)
  • Electrical Requirements : 3 Phases, 440V, 60Hz
  • Energy Consumption : 0.75 Kw
  • Dimensions (W*L*H) : 1500*2500*950 mm
  • Machine Weight : ~350 kg
  • Conveyor Motor : Ex‐proof
  • Three heads filler
  • 35,45,52,57,65 diameter cans
  • Double head filling 100 -750ml for cans
  • Filling range 5 – 200 ml
  • Production capacity 50-60 cans of 200ml liquid
  • Air consumption 1200 lt\min Pneumatic system
  • Operating Air Pressure 8-10 bar
  • Single head crimper
  • Suitable for all type of aerosol cans
  • Our crimping machines are known for their qualitative features like quick setting crimp-diameter, crimp-depth and auto-adjustment.
  • Operating Air Pressure 8-10 bar
  • “PROPELLENT FILLING MACHINE It is a automatic propellant filling (Gas) machine suitable for liquid gases like FREON HYLON, DME, LPG etc. It is a system
  • Four heads filler
  • 35,45,52,57,65 diameter cans
  • Filling range 15 – 350 ml
  • Air consumption 1600 lt\min Pneumatic system
  • Operating Air Pressure 8-10 bar
  • Double head filling 100 -750ml for cans
  • Gas Filling Volume Range 10 ml -200ml 4 pieces
  • Table mounted, Twin controlled, partial filling arrangement, fast filling and safe working machine even for LPG.
  • Single head actuator inserter and sorter
  • 35,45,52,57,65 diameter cans
  • Operating Air Pressure 8-10 bar
  • 0,37kw unit motor
  • 0,18kw seperator motor

 

The machine does work only if;

 

  • Enough air pressure provided
  • Conveyor is moving
  • Actuator inserter wouldnt start if the container is not in place
  • Construction and equipment are stainless steel AISI 304 QUALITY
  • All Ex-proof motor
  • Cabinet and protective covers
  • Production capacity 80cpm
  • Electronic sensor system at entry and exit gates
  • 35-65 diameter cans
  • 0,37kw unit motor
  • Single head capper and cap feeder
  • Single head hammer
  • 35,45,52,57,65 diameter cans
  • Operating Air Pressure 8-10 bar
  • 0,37kw unit motor
  • 0,18kw feeder motor

The machine does work only if;

  • Enough air pressure provided
  • Conveyor is moving
  • Cap placer wouldn’t start if the container is not in place
  • Working Speed : Up to 80 pcs per min.
  • Capacity : 5-1.000 g
  • Accuracy : +/- 2 g
  • Screen : Touch 256 color 8’’ TFT
  • Adjustable vibration filters, accuracy, capacity feature on screen
  • Accuracy might depend on environmental factors
  • Only one product can be passed and controlled through band.Once the product is changed,wheel needs to be stopped and needs to be adjusted according to weight and control value of new product.
  • System is non-exproof
  • It adopts double blowing motor to keep air wind dissipated evenly in tunnel. So that can achieve the better effect after shrinking
  • Temperature of blade is 0-200 C
  • Speed of packing 25-30 pcs/min
  • Power 24kw
  • Power supply 3PH 220V/380V 50/60 Hz

 

Tunnel Band and heating system;

  • Wicker wire band
  • Motor & Reductive System (wat + varvel )
  • Tunnel band with speed control unit (Schneider)
  • Isolation cast stone wool
  • Furnace paint is used
  • Tunnel working by thermostat heat control can shrink between temperature of 160 and 250
  • Facility in order to reach a qualified shrink pack by heat flowing canal system working with single fan homogeneously
  • Replacing heating resistances might be carried out easily on the top of tunnel
  • It has canal system that provides a homogeneous heat flow to every single part of packs

 

Tunnel Electricity;

  • Electricity pure material : schneider, Moeller
  • Maximum heating power : 40 kw
  • Power in average : 18 kw
  • Electricity feeding : 380V 50-60 Hz

 

Tunnel Outlet Cooling;

  • A high qualified shrink pack will be obtained owing to a shocking system and Axial cooling fan at tunnel outlet
  • Paint : Furnace paint
  • The conveyor length at the end of tunnel is 2 meters as standard
Automatic Shrink Wrapper 517x250
  • Electrical power needed by the line 3x440V 60 Hz, 10Kw
  • The voltage and the frequency can be changed to the customer’s requirements IP65 safety class electrical equipment
  • Control unit voltage: 24VDC
  • The necessary control equipment and the basic operator Interfaces are built on.
  • Main switch, main contactors, contactors, motor starters Circuit breakers, terminal fuses, power supply
  • Safety relays, thermistor control relays, etc. Frame and brackets in stainless Steel AISI 304 Standard ESP equipment